0800 100 400
Call us for a free quote
Contact Us
0800 100 400
Call us for a free quote
The Smart Clean Difference

The Smart Clean Difference

The New Zealand AS/NZS 3733 requires carpets to be cleaned according to a specific process, requiring Chemicals, Heat, Agitation and Time (no rush jobs). This is a minimum. Few cleaners offer this. Smart Clean 7 Step Process meets these standards and raises the bar even further.

1. Cyclonic carpet vacuum

1. Cyclonic carpet vacuum

79% of carpet soiling is dry soil. The New Zealand AS/NZS 3733 standards recommend an upright vacuum cleaner with beater-bar or brush to remove maximum dry soil before wet cleaning. Soil left behind from inefficient methods is one reason carpets smell bad after cleaning

2. Apply the right cleaning agent

2. Apply the right cleaning agent

Did you know the wrong chemical can void your flooring guarantee?
Every carpet fibre, including wool, is different. Each type of fibre requires a particular mix of cleaning agents to penetrate deep into the carpet and clear out embedded soils, stains and odours.

3. Agitation that eliminates stains

3. Agitation that eliminates stains

Stains, spots and soil marks that keep coming back are a huge source of frustration. Incorrect cleaning agents and lack of proper agitation are two reasons why oils and other substances stick around. Smart Clean will use special equipment and chemicals to remove unsightly spots for good.

4. Hot water extraction

The hotter the water the better the finish. Smart Clean brings the largest truck mounted rotary carpet extractor to your home or office, and will apply the highest levels of heated water – as well as airflow and water-lift – available in Auckland to get your carpets cleaner and post-clean drier than they’ve ever been

5. Right Rinsing

5. Right Rinsing

Incomplete rinsing leaves a smell and a dull finish to your carpet clean. Smart Clean uses a conditioner to remove the most soil and cleaning residues to achieve best results – soft and clean for longer.

6. Grooming

6. Grooming

A good after-clean brush – using brushes and rakes with soft, dense bristles – stands the pile up to allow airflow and quicker drying, and leaves a nice uniform finish.

7. Aided Drying

7. Aided Drying

Smart Clean’s carpet and floor dryers (down draft air movers), speed-dry carpets and hard floors after cleaning by blowing warm air at 360-degree angles across the floor.

Experience the 7 Step Clean

Smart Clean’s experience and knowledge – we provide training to carpet and upholstery cleaning industry technicians locally and internationally – as well as our eco-friendly chemicals, equipment and techniques will get the job done. Ask us for a free quote.